MS model complete equipment for treatment of living sewage is mainly suitable for living sewage and similar industrial organic sewage. Its main treatment method is adopting international advanced biochemical contact oxidation treatment technology. The design parameters of water quality are according to the water quality for living water. The average water inlet is BOD5 200mg/L and the water outlet is BOD5 20mg/L. 。
This equipment is embedded in ground, with reliable and rational structure. The housing and pipes are all made of stainless steel to ensure service life of above 30 years due to its difficult repair & maintenance. Meanwhile it can also be made of A3 steel plate and seamless pipe according to requirement of customer. And it will be preservative treated according to the standard of the Ministry of Chemical Industry to ensure operating life of more than 10 years.
1
Regulating tank (excluding the complete equipment)
2
Dirt sedimentation pump (one for use and one for standby)
3
Preliminary sedimentation tank
4
Third-phase contact oxygen tank
5
Secondary sedimentation tank (two run in parallel connection)
6
Purifying tank
7
Sterilizing device
8
Sludge tank
9
Fan chamber
10
Inner motor (two run alternatively)
Technical data of MS equipment
Type
\Name
WSZ-X-0.5
WSZ-X-1
WSZ-X-3
WSZ-X-5
WSZ-X-10
WSZ-X-20
WSZ-X-30
Capacity（m3/h）
0.5
1
3
5
10
20
30
Fan
Type
L13LD
L13LD
L21LD
L22LD
L32LD
L33LD
L42LD
Power rate（kw）
0.75
0.75
1.5
1.5
2.2
4
7.5
Pump
Type
AS10-2CB
AS10-2CB
AS10-2CB
AS10-2CB
AS10-2CB
AS16-2CB
AS16-2CB
Power rate（kw）
1.1
1.1
1.1
1.1
1.1
2.2
2.2
Water-in
BOD5MG/l
150-400
Water-out
BOD5MG/l
20-60
Relationship form between capacity of MS equipment and water in-out BOD5
