As an integration of sludge thickening and dewatering, belt type thickener filter press dewatering machine is a kind of continuously operating highly efficient solid-liquid separation equipment. It is widely used for the solid-liquid separation in chemical, metallurgy, mining, food, paper, urban water supply and drainage industries. This equipment makes technical process simple and it has strong process applicability. Continuous operation save the investment of sludge thickening tank, and the sludge retention time is short, providing good dephosphorization effect and high processing efficiency. Large sludge production capacity and low mudcake moisture content produces high solid recovery rate. Extended gravity dewatering zone; increasing the effective bandwidth by 150 mm; reasonable roll system composed of more press rolls; strengthened the primary roll press force distribution design.
The main technical parameters :
型式 Model
|
处理能力 Capacity
|
滤带 Filter belt
|
清洗用水
|
气压
|
泥饼含水率Mud cake moisture content
|
m3/h
|
宽度 Width mm
|
浓缩段速度Enriching section speed m/min
|
压榨段速度Press section speed m/min
|
水量 Water volume m3/h
|
水压Water pressure MPa
|
Air pressure MPa
|
%
|
MW-DYN1000
|
15~40
|
1150
|
0.5~5
|
1~5
|
<12
|
>0.6
|
0.6~0.8
|
65~85
|
MW-DYN1500
|
20~60
|
1650
|
0.5~5
|
1~5
|
<20
|
>0.6
|
0.6~0.8
|
MW-DYN2000
|
25~80
|
2150
|
0.5~5
|
1~5
|
<25
|
>0.6
|
0.6~0.8
|
MW-DYN2500
|
40~100
|
2650
|
0.5~5
|
1~5
|
<40
|
>0.6
|
0.6~0.8
|
MW-DYN3000
|
60~120
|
3150
|
0.5~5
|
1~5
|
<45
|
>0.6
|
0.6~0.8
|
